website builder

CBM2010 Series Powered
Remote Monitoring Unit

The CBM2010 is a highly capable Remote Monitoring Unit for Cellular networks (2G or 3G and future 4G CatM1) with a variety of inputs and outputs.

The CBM2010 expands on the base module CBM2000 with the addition of Iridium Satellite communications which allows the CBM2010 to continue to send data when the cellular network is not available. 

Safety requirements for lone or remote workers such as location, communication, duress, accident, breakdown and emergency response are covered by the state-of-the-art CBM2010 3G/Iridium Hybrid option. Your workforce remains connected and can be proactively monitored anywhere.

The CBM2010 supports interfacing to the PC2 and PC3 range of programmable controllers via a serial interface.

• Remote Monitoring and Control via I/O and Communications interfaces
• Powered Asset Tracking
• Vehicle and Wagon Tracking
• Yard Geo-fencing Monitoring and Alerting
• Trailers and Mobile Assets
• Run Hour and Distance Monitoring
• Anchoring and Security of Assets
• The Custom Message Communication from PC2 and PC3 Controllers

• 24/7 Asset Location
• Cellular data when in coverage
• Iridium Satellite when out of cellular coverage 
• Input Power 8-45VDC
• Internal Backup Battery
• 5 x Digital inputs
• 2 x Digital outputs
• Serial Interface
• Configure over-the-air (OTA)
• Switch from “locate” to “track” over-the-air
• Integrated 3 axis accelerometer
• Temperature Monitoring
• 50K records data logging capacity

Power Requirements:

• Voltage: 8-45VDC
• Current: 15mA average (battery fully charged), 135mA average (battery charging)

Sleep Current:

• <1mA

Backup Battery:

• The standard 800mAh LiPo backup battery allows the G100 to operate when external power is removed for up to 4 days, depending on the amount of movement

Environmental:

• -20°C to +60°C

Cellular Connectivity:

• Network: 2G/3G HSDPA (future 4G LTE CatM1)
• SIM: Standard (2FF) cellular SIM
• GSM Antenna: Internal cellular antenna tuned by RF laboratories to ensure optimal performance

Auto-APN:

• Analyse SIM and detect APN from pre-loaded list.
• Multi-APN on board for roaming

GPS Tracking:

• GPS Module: High sensitivity assisted GPS receiver, 72 channel
• GPS/GLONASS: Concurrent GPS/GLONASS
• GPS Antenna with LNA: Internal antenna. Boosted by low-noise amplifier (LNA) allows operation in "urban canyons" and container stacks

Adaptive Tracking:

• Adaptive-Tracking technology enables accelerometer and GPS data to be used intelligently to work out if it is moving and send frequent updates, as well as to scale the update down to once per day if the asset is stationary in order to preserve battery life

Digital Inputs:

• 1 x Ignition line
• 4 x Digital inputs with configurable pull-up/pull-down

Digital Outputs:

• 2 x Switched ground digital outputs

Communications Ports:

• 1 x 3 wire RS232 Interface
• 1 x iButton (1 wire)

Iridium Satellite:

• Auto-switch Cellular/Iridium

Temperature Sensor:

• The on board temperature sensor is accurate to +/-5°C

Internal Memory:

• Flash memory can store 50,000 records

3D Accelerometer:

• The 3 axis accelerometer allows the device to "sleep" in an ultra-low power state yet still wake up when movement occurs

Mechanical:

• Enclosure Material: Snap-Clip ABS Plastic Housing
• Product Dimensions: 125mm(L) x 65mm(W) x 30mm(H)
• Weight: 250g with batteries installed

Terminations:

• 24 Pin Molex Plug/Socket Connector

Mobirise

Talk to our technical sales staff about your product vision.

MORE INFORMATION

Address

Unit 13, 82 Reserve Rd.
Artarmon, NSW 2064
Australia

Contacts

Email: sales@oem.net.au
Phone: +61 2 9966 9424
Fax: +61 2 9966 9429

Links

News 
Events 
Contact